web analytics

Free Share The Newest Microsoft MCTS Exam Questions And Answers From PassLeader

[22/Mar/2018 Updated] Testing PassLeader 300-180 Exam Questions and Answers To 100% Pass 300-180 Exam

New Updated 300-180 Exam Questions from PassLeader 300-180 PDF dumps! Welcome to download the newest PassLeader 300-180 VCE dumps: https://www.passleader.com/300-180.html (374 Q&As)

Keywords: 300-180 exam dumps, 300-180 exam questions, 300-180 VCE dumps, 300-180 PDF dumps, 300-180 practice tests, 300-180 study guide, 300-180 braindumps, Troubleshooting Cisco Data Center Infrastructure (DCIT) Exam

P.S. New 300-180 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNWtfazZEX1o5eWc

>> New 300-160 DCID dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs

>> New 300-170 DCVAI dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNVNCbDRrNUN3NWM

>> New 300-165 DCII dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0

>> New 300-175 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpcTYwUlg5R2o2Tlk

NEW QUESTION 352
You plan to use OSPFv2 on several Cisco Nexus 9000 Series Switches. Which setting must match on the neighboring switches to establish adjacency?

A.    the LSA arrival time
B.    the dead interval
C.    the last flood scan time
D.    the retransmit interval

Answer: A

NEW QUESTION 353
After removing a VMM domain from an EPG, you discover that the associated virtual port groups remain in the VMware vCenter configuration. What causes the virtual port groups to persist in the configuration?

A.    The MAC addresses that are learned by the ports of the spine switches are incorrect.
B.    The port groups are being used by a virtual machine network adapter.
C.    The MAC addresses that are learned by the ports of the leaf switches are incorrect
D.    There is a mismatch between the data center name in vCenter and the VMM controller policy.

Answer: B

NEW QUESTION 354
When troubleshooting VXLAN, which interface is the source of all the encapsulated packets?

A.    VTEP loopback
B.    SVl
C.    VLAN
D.    vPC

Answer: A

NEW QUESTION 355
What can prevent you from adding an interface to a pre-existing port-channel on a CISCO Nexus N7K device?

A.    The port-channel is In LACP passive mode.
B.    The interface already assigned to a different port-channel.
C.    The interface has been allocated to a different VOC.
D.    No shutdown was issued on the interface.

Answer: B

NEW QUESTION 356
Which two ports must be open on a VMware vCenter server to allow communications to a Cisco Nexus 1000V Series Switch? (Choose two.)

A.    80
B.    443
C.    21
D.    2010
E.    20

Answer: AB

NEW QUESTION 357
From Cisco UCS Central, you plan to add two Cisco UCS domains that use the same name for the WWPN pool. What must you do to ensure a successful Integration?

A.    Rename the pools to have the same name.
B.    Assign WWPN pools to Different users.
C.    Move the WWPN pools to different organizations.
D.    Remove duplicate WWPN pools.

Answer: B

NEW QUESTION 358
You install a new DIMM in a Cisco UCS C-Series standalone rack server and that DIMM is not recognized by the server. What actions do you take to troubleshoot the problem? (Choose two.)

A.    Remove an old DIMM from the blue memory slot and install the new DIMM there.
B.    Verify that the DIMM has been qualified to work on Cisco UCS servers.
C.    Return the DIMM for a new replacement.
D.    Remove and dispose of the bad DIMM.
E.    Verify that the DIMM is in a slot that supports an active CPU.

Answer: BD

NEW QUESTION 359
Which two commands will show all the MAC addresses learned from remote sites in an OTV overlay? (Choose two.)

A.    show otv route overlay
B.    show otv vlan
C.    show ip arp
D.    show mac address-table
E.    show otv site

Answer: AD

NEW QUESTION 360
Which command must you use to identify an active VIF for a particular blade in a Cisco UCS B-Series chassis?

A.    scope service-profile server [blade_slot]
B.    show cluster extended-state
C.    show pinning border-interfaces
D.    show service-profile circuit server [blade_slot]

Answer: C

NEW QUESTION 361
In Cisco UCS, which logs are used to troubleshoot hardware failure?

A.    system event log
B.    audit log
C.    gateway logs
D.    system log

Answer: A

……

NEW QUESTION 373
Drag and Drop
Two fabric interconnects fail during a Cisco UCS firmware upgrade. Drag and drop the recovery steps from the left into the correct order on the right.
……

NEW QUESTION 374
Drag and Drop
Drag the Cisco UCS Manager maintenance actions on the left to the correct descriptions on the right. Not all options are used.
……


Download the newest PassLeader 300-180 dumps from passleader.com now! 100% Pass Guarantee!

300-180 PDF dumps & 300-180 VCE dumps: https://www.passleader.com/300-180.html (374 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!)

P.S. New 300-180 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNWtfazZEX1o5eWc

>> New 300-160 DCID dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpeVktaU1qdFl4WGs

>> New 300-170 DCVAI dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpNVNCbDRrNUN3NWM

>> New 300-165 DCII dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpMVRmUUJZRWU3cU0

>> New 300-175 DCIT dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpcTYwUlg5R2o2Tlk