This page was exported from All The Latest MCTS Exam Questions And Answers For Free Share [ https://www.mctsdump.com ]
Export date: Thu Mar 28 14:50:02 2024 / +0000 GMT

[Feb-2016 Update] Training New PassLeader NSE4 Study Materials With Real VCE Dumps (21-40)


100% Pass Ensure NSE4 Exam Dumps: PassLeader provides the newest NSE4 dumps updated in recent days with total 222q exam questions, it is the best study materials for preparing NSE4 certification exams. PassLeader's NSE4 exam dumps will offer you the latest questions and answers with free VCE and PDF file to download, which will help you 100% passing NSE4 exam. And PassLeader also supply the newest free version VCE Player now!

keywords: NSE4 exam,222q NSE4 exam dumps,222q NSE4 exam questions,NSE4 pdf dumps,NSE4 vce dumps,NSE4 practice test,NSE4 study guide,NSE 4 -- Fortinet Network Security Professional Exam

QUESTION 21
In the case of TCP traffic, which of the following correctly describes the routing table lookups performed by a FortiGate operating in NAT/Route mode, when searching for a suitable gateway?

A.    A lookup is done only when the first packet coming from the client (SYN) arrives.
B.    A lookup is done when the first packet coming from the client (SYN) arrives, and a second one is performed when the first packet coming from the server (SYN/ACK) arrives.
C.    Three lookups are done during the TCP 3-way handshake (SYN, SYN/ACK, ACK).
D.    A lookup is always done each time a packet arrives, from either the server or the client side.

Answer: B

QUESTION 22
Examine the two static routes to the same destination subnet 172.20.168.0/24 as shown below; then answer the question following it.
config router static
edit 1
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 10
set device port1
next
edit 2
set dst 172.20.168.0 255.255.255.0
set distance 20
set priority 20
set device port2
next
end
Which of the following statements correctly describes the static routing configuration provided above?

A.    The FortiGate evenly shares the traffic to 172.20.168.0/24 through both routes.
B.    The FortiGate shares the traffic to 172.20.168.0/24 through both routes, but the port2 route will carry approximately twice as much of the traffic.
C.    The FortiGate sends all the traffic to 172.20.168.0/24 through port1.
D.    Only the route that is using port1 will show up in the routing table.

Answer: C

QUESTION 23
Examine the exhibit below; then answer the question following it.

In this scenario, the FortiGate unit in Ottawa has the following routing table:
S* 0.0.0.0/0 [10/0] via 172.20.170.254, port2
C 172.20.167.0/24 is directly connected, port1
C 172.20.170.0/24 is directly connected, port2
Sniffer tests show that packets sent from the source IP address 172.20.168.2 to the destination IP address 172.20.169.2 are being dropped by the FortiGate located in Ottawa. Which of the following correctly describes the cause for the dropped packets?

A.    The forward policy check.
B.    The reverse path forwarding check.
C.    The subnet 172.20.169.0/24 is NOT in the Ottawa FortiGate's routing table.
D.    The destination workstation 172.20.169.2 does NOT have the subnet 172.20.168.0/24 in its routing table.

Answer: B

QUESTION 24
Review the output of the command get router info routing-table database shown in the exhibit below; then answer the question following it.

Which two statements are correct regarding this output? (Choose two.)

A.    There will be six routes in the routing table.
B.    There will be seven routes in the routing table.
C.    There will be two default routes in the routing table.
D.    There will be two routes for the 10.0.2.0/24 subnet in the routing table.

Answer: AC

QUESTION 25
Examine the exhibit; then answer the question below.

The Vancouver FortiGate initially had the following information in its routing table:
S 172.20.0.0/16 [10/0] via 172.21.1.2, port2
C 172.21.0.0/16 is directly connected, port2
C 172.11.11.0/24 is directly connected, port1
Afterwards, the following static route was added:
config router static
edit 6
set dst 172.20.1.0 255.255.255.0
set pririoty 0
set device port1
set gateway 172.11.12.1
next
end
Since this change, the new static route is NOT showing up in the routing table. Given the information provided, which of the following describes the cause of this problem?

A.    The subnet 172.20.1.0/24 is overlapped with the subnet of one static route that is already in the routing table (172.20.0.0/16), so, we need to enable allow-subnet-overlap first.
B.    The 'gateway' IP address is NOT in the same subnet as the IP address of port1.
C.    The priority is 0, which means that the route will remain inactive.
D.    The static route configuration is missing the distance setting.

Answer: B

QUESTION 26
A FortiGate is configured with three virtual domains (VDOMs). Which of the following statements is correct regarding multiple VDOMs?

A.    The FortiGate must be a model 1000 or above to support multiple VDOMs.
B.    A license has to be purchased and applied to the FortiGate before VDOM mode could be enabled.
C.    Changing the operational mode of a VDOM requires a reboot of the FortiGate.
D.    The FortiGate supports any combination of VDOMs in NAT/Route and transparent modes.

Answer: D

QUESTION 27
Which statements are correct regarding virtual domains (VDOMs)? (Choose two.)

A.    VDOMs divide a single FortiGate unit into two or more virtual units that each have dedicated memory and CPUs.
B.    A management VDOM handles SNMP, logging, alert email, and FDN-based updates.
C.    VDOMs share firmware versions, as well as antivirus and IPS databases.
D.    Different time zones can be configured in each VDOM.

Answer: BC

QUESTION 28
A FortiGate is configured with multiple VDOMs. An administrative account on the device has been assigned a Scope value of VDOM:root. Which of the following settings will this administrator be able to configure? (Choose two.)

A.    Firewall addresses.
B.    DHCP servers.
C.    FortiGuard Distribution Network configuration.
D.    System hostname.

Answer: AB

QUESTION 29
A FortiGate administrator with the super_admin profile configures a virtual domain (VDOM) for a new customer. After creating the VDOM, the administrator is unable to reassign the dmz interface to the new VDOM as the option is greyed out in the GUI in the management VDOM. What would be a possible cause for this problem?

A.    The administrator does not have the proper permissions to reassign the dmz interface.
B.    The dmz interface is referenced in the configuration of another VDOM.
C.    Non-management VDOMs cannot reference physical interfaces.
D.    The dmz interface is in PPPoE or DHCP mode.

Answer: B

QUESTION 30
A FortiGate unit is configured with three Virtual Domains (VDOMs) as illustrated in the exhibit.

Which of the following statements are true if the network administrator wants to route traffic between all the VDOMs? (Choose three.)

A.    The administrator can configure inter-VDOM links to avoid using external interfaces and routers.
B.    As with all FortiGate unit interfaces, firewall policies must be in place for traffic to be allowed to pass through any interface, including inter-VDOM links.
C.    This configuration requires a router to be positioned between the FortiGate unit and the Internet for proper routing.
D.    Inter-VDOM routing is automatically provided if all the subnets that need to be routed are locally attached.
E.    As each VDOM has an independent routing table, routing rules need to be set (for example, static routing, OSPF) in each VDOM to route traffic between VDOMs.

Answer: ABE


http://www.passleader.com/nse4.html

QUESTION 31
A FortiGate is operating in NAT/Route mode and configured with two virtual LAN (VLAN) sub-interfaces added to the same physical interface. Which one of the following statements is correct regarding the VLAN IDs in this scenario?

A.    The two VLAN sub-interfaces can have the same VLAN ID only if they have IP addresses in different subnets.
B.    The two VLAN sub-interfaces must have different VLAN IDs.
C.    The two VLAN sub-interfaces can have the same VLAN ID only if they belong to different VDOMs.
D.    The two VLAN sub-interfaces can have the same VLAN ID if they are connected to different L2 IEEE 802.1Q compliant switches.

Answer: B

QUESTION 32
Which statements are correct for port pairing and forwarding domains? (Choose two.)

A.    They both create separate broadcast domains.
B.    Port Pairing works only for physical interfaces.
C.    Forwarding Domain only applies to virtual interfaces.
D.    They may contain physical and/or virtual interfaces.

Answer: AD

QUESTION 33
In transparent mode, forward-domain is an CLI setting associate with ______________.

A.    a static route.
B.    a firewall policy.
C.    an interface.
D.    a virtual domain.

Answer: C

QUESTION 34
Which statements correctly describe transparent mode operation? (Choose three.)

A.    The FortiGate acts as transparent bridge and forwards traffic at Layer-2.
B.    Ethernet packets are forwarded based on destination MAC addresses, NOT IP addresses.
C.    The transparent FortiGate is clearly visible to network hosts in an IP trace route.
D.    Permits inline traffic inspection and firewalling without changing the IP scheme of the network.
E.    All interfaces of the transparent mode FortiGate device must be on different IP subnets.

Answer: ABD

QUESTION 35
Which of the following sequences describes the correct order of criteria used for the selection of a master unit within a FortiGate high availability (HA) cluster when override is disabled?

A.    1. port monitor, 2. unit priority, 3. up time, 4. serial number.
B.    1. port monitor, 2. up time, 3. unit priority, 4. serial number.
C.    1. unit priority, 2. up time, 3. port monitor, 4. serial number.
D.    1. up time, 2. unit priority, 3. port monitor, 4. serial number.

Answer: B

QUESTION 36
Which of the following statements are correct about the HA command diagnose sys ha reset-uptime? (Choose two.)

A.    The device this command is executed on is likely to switch from master to slave status if override is disabled.
B.    The device this command is executed on is likely to switch from master to slave status if override is enabled.
C.    This command has no impact on the HA algorithm.
D.    This command resets the uptime variable used in the HA algorithm so it may cause a new master to become elected.

Answer: AD

QUESTION 37
What are the requirements for a HA cluster to maintain TCP connections after device or link failover? (Choose two.)

A.    Enable session pick-up.
B.    Enable override.
C.    Connections must be UDP or ICMP.
D.    Connections must not be handled by a proxy.

Answer: AD

QUESTION 38
Review the static route configuration for IPsec shown in the exhibit; then answer the question below.

Which statements are correct regarding this configuration? (Choose two.)

A.    Interface remote is an IPsec interface.
B.    A gateway address is not required because the interface is a point-to-point connection.
C.    A gateway address is not required because the default route is used.
D.    Interface remote is a zone.

Answer: AB

QUESTION 39
Review the IPsec diagnostics output of the command diagnose vpn tunnel list shown in the exhibit.

Which statements is correct regarding this output? (Select one.)

A.    One tunnel is rekeying.
B.    Two tunnels are rekeying.
C.    Two tunnels are up.
D.    One tunnel is up.

Answer: C

QUESTION 40
Review the IPsec phase 2 configuration shown in the exhibit; then answer the question below.

Which statements are correct regarding this configuration? (Choose two.)

A.    The Phase 2 will re-key even if there is no traffic.
B.    There will be a DH exchange for each re-key.
C.    The sequence number of ESP packets received from the peer will not be checked.
D.    Quick mode selectors will default to those used in the firewall policy.

Answer: AB


http://www.passleader.com/nse4.html

Post date: 2016-02-25 07:23:35
Post date GMT: 2016-02-25 07:23:35
Post modified date: 2016-02-25 07:23:35
Post modified date GMT: 2016-02-25 07:23:35
Powered by [ Universal Post Manager ] plugin. HTML saving format developed by gVectors Team www.gVectors.com