This page was exported from All The Latest MCTS Exam Questions And Answers For Free Share
[
https://www.mctsdump.com
]
Export date: Fri Mar 29 9:41:27 2024 / +0000 GMT
New Updated 300-101 Exam Questions from PassLeader 300-101 PDF dumps! Welcome to download the newest PassLeader 300-101 VCE dumps: http://www.passleader.com/300-101.html (332 Q&As) Keywords: 300-101 exam dumps, 300-101 exam questions, 300-101 VCE dumps, 300-101 PDF dumps, 300-101 practice tests, 300-101 study guide, 300-101 braindumps, Implementing Cisco IP Routing Exam P.S. New 300-101 dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs NEW QUESTION 296 A. content-based access lists Answer: D NEW QUESTION 297 A. domain search list Answer: DEF NEW QUESTION 298 A. It is used to policy route packets that are generated by the device. Answer: A NEW QUESTION 299 A. show snmp group Answer: B NEW QUESTION 300 A. information about tracking list 1. Answer: A NEW QUESTION 301 A. interface GigabitEthernet0/0 Answer: C NEW QUESTION 302 A. syslog Answer: B NEW QUESTION 303 A. It translates the IPv6 header into an IPv4 header. Answer: A NEW QUESTION 304 A. service timestamps log uptime Answer: A NEW QUESTION 305 A. Responder Answer: D NEW QUESTION 306 A. The subnet defined in OSPF is not part of area 0. Answer: B NEW QUESTION 307 A. A crypto map must be configured. Answer: BD NEW QUESTION 308 A. router#show ipv6 rip next-hops Answer: A NEW QUESTION 309 A. exec-time out Answer: C NEW QUESTION 310 A. serve Answer: A NEW QUESTION 311 Download the newest PassLeader 300-101 dumps from passleader.com now! 100% Pass Guarantee! 300-101 PDF dumps & 300-101 VCE dumps: http://www.passleader.com/300-101.html (332 Q&As) (New Questions Are 100% Available and Wrong Answers Have Been Corrected! Free VCE simulator!) P.S. New 300-101 dumps PDF: https://drive.google.com/open?id=0B-ob6L_QjGLpZEE0S2YxR3ZMUWs
Which type of access list allows granular session filtering for upper-level protocols?
B. context-based access lists
C. reglexive access lists
D. extended access lists
Which three configuration parameters can a DHCPV6 pool contain? (Choose three.)
B. router IP
C. default gateway
D. prefix delegation
E. DNS servers
F. subnet mask
Which statement about local policy routing is true?
B. It requires all packets to be packet switched.
C. It is used to policy route packets that pass through the device.
D. It requires all packets to be CEF switched.
E. It supports IPv4 packets only.
F. It requires an ip address or access list as the matching criteria.
Which SNMP verification command shows the encryption and authentication protocols that are used in SNMPV3?
B. show snmp user
C. show snmp
D. show snmp view
Which type of information is displayed when a network engineer executes the show track 1 command on the router?
B. time to next poll for track object 1.
C. information about the IP route track table.
D. tracking information statistics.
Which command sequence can you enter on a router to configure Unicast Reverse Path Forwarding in loose mode?
ip verigy unicast source reachable-via all
B. interface GigabitEthernet0/0
ip verigy unicast source reachable-via loose
C. interface GigabitEthernet0/0
ip verigy unicast source reachable-via any
D. interface GigabitEthernet0/0
ip verigy unicast source reachable-via rx
Where can NetFlow export data for long term storage and analysis?
B. collector
C. another network device
D. flat file
Which option is the first task that a device that is configured with NAT64 performs when it receives an incoming IPv6 packet that matches the stateful NAT64 prefix?
B. It checks the IPv6 packet against the NAT64 stateful prefix.
C. It translates the IPv6 source address to an IPv4 header.
D. It translates the^ IPv4 destination address into a new NAT64 state.
E. It performs an IPv6 route lookup.
Which command do you enter to display log messages with a timestamp that includes the length of time since the device was last rebooted?
B. logging facility 20
C. service timestamps debugging localtime msec
D. logging console errors
E. logging monitor 7
F. service timestamps log datetime msec
Which option must be configured on a target device to use time stamping to accurately represent response times using IP SLA?
B. Jitter value
C. TCP Connect
D. ICMP Echo
Refer to the exhibit. Which option describes why the EIGRP neighbors of this router are not learning routes that are received from OSPF?
router eigrp 1
redistribute ospf 100
network 10.10.10.0 0.0.0.255
auto-summary
!
router ospf 100
network 172.16.0.0 0.0.255.255 area 100
redistribute eigrp 1
B. Default metrics are not configured under EIGRP.
C. There is no overlap in the subnets advertised.
D. The routing protocols do not have the same AS number.
Which two options are requirements for EIGRP authentication? (Choose two.)
B. The Authentication key must be configured under the interface running EIGRP.
C. The authentication key must be configured within the EIGRP routing configuration.
D. The authentication key IDs must match between two neighbors.
E. A separate key chain must be configured.
F. AN IPsec profile must be configured.
A network engineer is troubleshooting connectivity issues with a directly connected RIPng neighbor. Which command should directly connected RIPng neighbor adjacencies only?
B. router#show ip rip neighbors
C. router#show ipv6 routers
D. router#show ipv6 rip database
Which security feature can you enable to control access to the vty lines on a router?
B. logging
C. username and password
D. transport output
A network engineer wants an NTP clients to be able to update the local system without updating or synchronizing with the remote system. Which option for the ntp access-group command is needed to accomplish this?
B. query-only
C. serve-only
D. peer
……
Post date: 2017-06-02 15:28:00
Post date GMT: 2017-06-02 15:28:00
Post modified date: 2017-06-02 15:28:00
Post modified date GMT: 2017-06-02 15:28:00
Powered by [ Universal Post Manager ] plugin. MS Word saving format developed by gVectors Team www.gVectors.com